Sodium 1-Hexanesulfonate (CAS 2832-45-3) | Ion-Pair Reagent for HPLC | China Manufacturer

Sep 29, 2026

Sodium 1-Hexanesulfonate (CAS 2832-45-3): Ion-Pair Reagent for HPLC and Beyond

If you work with reversed-phase HPLC and your analytes are too polar to retain well on a C18 column, you have probably reached for an ion-pair reagent. Among the choices available, sodium 1-hexanesulfonate (CAS 2832-45-3) occupies a practical middle ground. Its six-carbon alkyl chain is long enough to provide meaningful retention for basic analytes, yet short enough to avoid the excessive equilibration times and baseline noise that sometimes accompany longer-chain reagents.

This article looks at what sodium 1-hexanesulfonate does, where it performs best, and what to check when sourcing it. Full specifications, packaging options, and COA details are listed on the product page.

What It Is and What It Does

Sodium 1-Hexanesulfonate CAS 2832-45-3 white crystalline powder China Manufacturer Alfa Chemical

Sodium 1-hexanesulfonate, also called sodium hexanesulfonate or 1-hexanesulfonic acid sodium salt, is an anionic surfactant with the molecular formula C₆H₁₃NaO₃S and a molecular weight of 188.22 g/mol. It appears as a white crystalline powder that is soluble in water and slightly soluble in ethanol. The compound is hygroscopic and light-sensitive, so storage in a sealed, light-resistant container is standard practice.

In HPLC, this ion-pair reagent works by pairing the hexanesulfonate anion with positively charged analyte molecules to form a neutral complex that retains better on a reversed-phase column. For a basic drug or peptide that would otherwise elute with the solvent front, adding 3–5 mmol/L to the mobile phase can shift retention into a usable range and improve peak shape.

Where It Fits in Ion-Pair Chromatography

Ion-pair reagents are often selected by alkyl chain length. Shorter chains (pentanesulfonate, C5) equilibrate faster but provide less retention. Longer chains (heptanesulfonate, C7; octanesulfonate, C8) give stronger retention but can require longer column equilibration and may increase baseline drift. Sodium 1-hexanesulfonate (C6) is a common compromise.

A published method for the simultaneous determination of water-soluble vitamins and preservatives used hexane-1-sulfonic acid sodium salt as part of the mobile phase. Another study on selenium speciation by HPLC-ICP-MS found that 5.0 mmol/L sodium hexane sulfonate provided baseline separation for five selenium compounds, with higher concentrations offering no additional benefit. That kind of concentration–response data is useful when optimizing a method and wanting to avoid overloading the mobile phase.

Beyond small-molecule pharmaceuticals, sodium 1-hexanesulfonate is used in peptide and protein analysis, where its pairing with basic residues improves retention and peak symmetry. It has also been applied in capillary electrophoresis for peptide separations.

Industrial Uses Beyond the Analytical Lab

Sodium 1-Hexanesulfonate CAS 2832-45-3 antistatic agent industrial application China Manufacturer Alfa Chemical

Sodium 1-hexanesulfonate is not limited to chromatography. Its anionic sulfonate group gives it surfactant and antistatic properties, and it is used as an intermediate in the preparation of antistatic polyester fibers. In textile processing, it can function as an emulsifier or antistatic agent where a short-chain sulfonate is preferred over longer-chain alternatives. It also finds use as a base in organic coupling reactions such as Suzuki couplings.

These industrial applications are less demanding than HPLC on purity and UV absorbance, but they still require consistent composition. A batch that performs well in a fiber antistatic formulation may not meet the UV cutoff requirements for gradient HPLC, so it is worth distinguishing between analytical-grade and industrial-grade material when specifying.

What to Check on the Specification Sheet

For HPLC use, the specification sheet should list UV absorbance at 210 nm and 220 nm in addition to assay. Typical limits are ≤0.1 AU at 200 nm, ≤0.05 AU at 210 nm, and ≤0.04 AU at 220 nm for a 0.25 M solution. These values matter because ion-pair reagents are used at relatively high concentrations in the mobile phase; even small amounts of UV-absorbing impurities can raise baseline absorbance and reduce detection sensitivity.

Water content is another parameter to watch. Anhydrous grades typically specify ≤2.0% water by Karl Fischer, while monohydrate forms are also commercially available. If you are preparing mobile phases by weight, the hydration state affects the actual concentration of the reagent. Either confirm the hydration state before weighing, or prepare by volume from a stock solution.

pH of a 100 g/L aqueous solution is typically in the range of 5.5–7.5 at 20°C. This is consistent with a neutral sodium sulfonate salt. If the pH drifts outside this range, it may indicate residual acid or hydrolysis.

Storage and Handling

Because the compound is hygroscopic, keep containers sealed when not in use. Store at 15–25°C in a dry, well-ventilated area away from direct light. Prolonged exposure to moisture will increase water content and may cause caking. For analytical work, use a desiccator for long-term storage of opened bottles.

Sodium 1-hexanesulfonate is classified as a combustible solid and carries a WGK 2 water hazard classification. Standard laboratory PPE - gloves, eye protection, and a lab coat - is appropriate. Dispose of according to local regulations.

Sourcing and Documentation

Sodium 1-Hexanesulfonate CAS 2832-45-3 25g 100g packaging China Manufacturer Alfa Chemical

Sodium 1-hexanesulfonate is available in quantities ranging from 5 g research samples to 100 g, 500 g, and bulk quantities. For formulators or analytical labs working through method development, small packaging is usually sufficient. Industrial users preparing antistatic formulations or intermediates may need larger quantities, and custom packaging can be arranged.

Alfa Chemical supplies sodium 1-hexanesulfonate (CAS 2832-45-3) from our Zhengzhou facility. Each batch includes a Certificate of Analysis covering assay, water content, pH, and UV absorbance. Safety Data Sheets are available on request. If you are evaluating the reagent for a specific HPLC method or industrial application, contact our technical team to discuss specifications and sample availability. Additional reagent-grade products are listed under Other Material Chemicals.

Related resources: Other Material Chemicals | Knowledge | Contact Us

Published: 2026-09-29, Zhengzhou, China. This article is for informational purposes. Alfa Chemical Co., Ltd is based in Zhengzhou, China.

You Might Also Like