(2-Aminoethyl)carbamic Acid (CAS 109-58-0, Diak No.2): A Blocked Diamine Curative for Fluoroelastomer Compounding
Nov 20, 2026
In fluoroelastomer (FKM) compounding, (2-aminoethyl)carbamic acid (CAS 109-58-0) - known in rubber work as Diak No.2 or ethylenediamine carbamate - acts as a latent diamine curative. It is a white carbamate powder (C3H8N2O2, MW 104.11) that stays blocked through mixing and storage, and releases the active diamine once the compound reaches cure temperature.
⚙️ In a nutshell
The carbamate masking keeps the amine from reacting during milling and shelf storage; on heating, the mask decomposes and the freed diamine bridges sites along the FKM backbone. That delayed release is what separates a blocked diamine cure from a free-amine system, and it is the main reason this curative is chosen for FKM compounds where processing safety and a controlled cure window matter.
1. How the Blocked Diamine Cures an FKM Compound
Diak No.2 is one member of the blocked diamine carbamate family. Rather than adding a free diamine directly, the supplier isolates the amine behind a carbamate group. In that masked form the material is comparatively stable on the mill and on the shelf; the curing action only resumes after heat breaks down the carbamate.
The release-and-crosslink sequence. During mixing, the carbamate-bound diamine remains dormant, so it does not prematurely engage the polymer. As the compound reaches cure temperature, the carbamate decomposes and the active diamine is released; the freed diamine then reacts along the fluoroelastomer backbone to build the crosslinked network in the finished vulcanizate. Cure speed, scorch safety, and the final network all depend on the FKM grade, the filler system, and the accompanying accelerators, so they are read from the compound's own cure test rather than assumed from the curative alone.
Why compounders choose the blocked form. A free diamine can start reacting while the compound is being milled or while it waits before molding, which shortens the workable window. Masking the amine as a carbamate pushes that reaction to the heating step, giving more time on the mill and a more repeatable cure. How wide that window turns out to be must still be confirmed on the actual compound, because filler choice and polymer type can shift scorch and cure behavior.
This two-carbon blocked diamine is paired in the same carbamate curative series with the longer-chain hexamethylenediamine carbamate, Diak No.1 / HMDC (CAS 143-06-6). They are separate parallel grades chosen against a formulation's cure and property targets; one is not a stand-in, precursor, or drop-in replacement for the other.
2. Material Profile and Reference Data
The parameters below align with the product page for CAS 109-58-0. Figures are typical catalogue ranges; measured values for a given lot appear on its Certificate of Analysis.
Density and refractive index listed on the product page are typical reference values. Ash, volatile matter, particle size, and lot-specific impurities are recorded on the batch COA; this guide does not carry a fixed dosage, which is set by the compound and confirmed in cure trials.
3. Fitting the Grade into a Formulation
When a curative moves from a small screening mix to production compounding, the checks that matter are whether the batch documentation supports the recipe, whether the same grade can be held across stages, and whether the pack size matches the mixing scale. The points below frame the discussion rather than a purchase decision.
- Batch QC: assay, ash, volatile matter, and any residual solvent figures are taken from the batch COA, not a catalogue average.
- Dossier: batch-specific COA and a GHS-format SDS accompany the lot; third-party testing can be arranged where the compounding specification requires it.
- Consistency across scale: the grade used in screening should be the same route supplied at production volume, so cure validation carries from lab mix to production batch.
- Pack size: evaluation packs through pilot and bulk drums are listed on the product page; the available pack for a given order is confirmed at enquiry.
Custom or higher-specification material can be discussed against the compound requirement; lot-specific values remain on the batch COA.
4. Handling, Moisture and Compatibility
As an amine-containing carbamate powder, the material should be kept dry and sealed, away from strong acids and strong oxidizers. Ventilation, PPE, and transfer procedures follow the SDS.
Compatibility note: Do not store or dose this curative alongside strong acids or strong oxidizing agents. Where the formulation brings the amine together under acidic conditions, confirm compatibility and the order of addition with the compounding protocol before scaling.
5. Common Compounding Questions
What is Diak No.2 used for in rubber?
Diak No.2 is the rubber-industry name for (2-aminoethyl)carbamic acid, CAS 109-58-0. It is a blocked diamine curative used in fluoroelastomer compounding; heat releases the active diamine that builds the crosslinked FKM network.
Is CAS 109-58-0 supplied as a free diamine?
No. It is supplied as the carbamate-blocked diamine. The amine is held in the masked form through mixing and storage and is only liberated once the compound reaches cure temperature, which supports delayed-action curing and a wider processing window.
What does the material look like?
It is a white crystalline powder with a faint ammoniacal odor. It dissolves in water and does not dissolve in non-polar solvents; particle size and appearance for a given lot are recorded on the COA.
How is the dosage set?
Dosage depends on the FKM grade, filler system, and accompanying accelerators rather than a fixed catalogue figure. It is established through cure trials on the actual compound; this guide does not state a phr level because single-source figures are not reliable across recipes.
How should it be kept?
Keep the container tightly sealed and dry, protected from moisture and air, and away from strong acids and oxidizers. Storage conditions and handling precautions are given in the SDS.
How does it relate to Diak No.1 (HMDC)?
Both are blocked diamine carbamate curatives in one series, but they are separate parallel grades with different chain lengths. Neither stands in for, precedes, or drops in for the other; the grade is chosen against cure and property targets and verified in compound trials.
About Alfa Chemical. Alfa Chemical is a Zhengzhou, Henan, China manufacturer of specialty chemicals spanning life sciences, material sciences, and industrial chemicals. We support projects from lab-scale screening to commercial bulk scale-up under batch control. In our organic building blocks line, (2-Aminoethyl)carbamic Acid (CAS 109-58-0) is supplied with batch-specific COA and SDS.
Related curative in the series: Diak No.1 / HMDC (CAS 143-06-6) - longer-chain parallel blocked diamine carbamate grade.
Pull the batch figures and review the compound recipe
Open the product page for specs and COA, or raise a technical question with our Zhengzhou R&D team.
Source: Alfa Chemical R&D Formulation Team · Alfa Chemical Technical Articles · Zhengzhou, China
URL: https://www.alfa-chemical.com/info/cas-109-58-0-aminoethyl-carbamic-acid-diak-no2-guide.html
For industrial and laboratory use only. Specifications are typical ranges; lot-specific values are reported on the batch COA.
You Might Also Like
-

CAS 35435-21-3 | Triethoxy(2,4,4-trimethylpentyl)silane
-

CAS 223437-05-6 | N-METHYL-N-PROPYLPYRROLIDINIUM BIS(TRIF...
-

CAS:14470-28-1 | 4-Anisylchlorodiphenylmethane
-

CAS 12179-42-9 | Vanadium Aluminum Carbide Powder (V2AlC)
-

CAS:13331-23-2 | 2-Furanboronic Acid
-

CAS:50358-63-9 | 6-Amino-5-bromoquinoxaline
