CAS 25104-37-4 | Poly(vinyl ethyl ether) PVE / PVEE | China Manufacturer
Product Name: Poly(vinyl ethyl ether) (PVE / PVEE)
Synonym: Poly(ethyl vinyl ether),PVEE, Lutonal A25 / A50 Equivalent, PVE Resin
CAS Number: 25104-37-4
Molecular Formula: (C4H8O)n
EINECS: 680-545-4
K Value: A25: 10~17 | A50: 55~65
Molecular Weight: A25: 3,000-5,000 | A50: ~70,000
Appearance: Colorless to bright yellow transparent viscous liquid
Density: 0.91-1.00 g/cm³
pH (5% in water): 3.5-6.0
Loss on Drying: ≤8.0%
Package: 20kg / 170kg drums
Lead Time: Ships in 3-7 business days from stock
Applications: Pressure-sensitive adhesives, coatings, rubber, plastics, artificial leather, textile finishes
Free Sample: Available upon request for R&D evaluation
Worldwide Delivery: DHL / FedEx / air / sea
- Worldwide Delivery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Poly(vinyl ethyl ether) PVE / PVEE | CAS 25104-37-4 | Lutonal A25 / A50 Performance Equivalent | China Manufacturer
A China-Direct Alternative to BASF Lutonal A25/A50
Comparable performance · China direct supply · Cost-effective
Pressure-Sensitive Adhesives
High peel strength at elevated temperature
Coatings & Surface Finishes
Improved leveling and film flexibility
Rubber & Plastics
Enhanced low-temperature toughness
Product Overview
Poly(vinyl ethyl ether) (PVE / PVEE, CAS 25104-37-4) is a vinyl ether homopolymer supplied as a colorless to pale yellow viscous liquid. Alfa Chemical manufactures PVE at our Zhengzhou facility in two grades - A25 and A50 - covering the full range from low-viscosity plasticizer to high-cohesion adhesive resin.
The two grades serve different formulation needs. A25 (K value 10–17, MW 3,000–5,000) functions as a plasticizer and leveling aid in nitrocellulose lacquers, printing inks, and surface coatings. A50 (K value 55–65, MW ~70,000) delivers the cohesive strength required for pressure-sensitive adhesives, rubber compounding, and artificial leather.
Both grades share a glass transition temperature of –60°C, providing rubber-like flexibility where other resins become brittle. This low Tg is why PVE is specified for cold-chain tape formulations and outdoor coatings.
PVE is a performance equivalent to BASF's Lutonal A25/A50 grades - same INCI-level chemistry, overlapping K value and MW ranges, and a formulation starting point that supports direct replacement in most systems. For detailed application notes, see our technical guide: Applications of Poly(vinyl ethers) - Lutonal A25/A50 Replacement Notes.
Key Features
Lutonal A25/A50 Equivalent
K value and MW ranges overlap with BASF Lutonal. Direct replacement in most formulations.
Two Grades from One Source
A25 for coatings and plasticizers. A50 for adhesives and rubber. Same QC documentation format.
Outstanding Low-Temperature Flexibility
Tg of –60°C provides rubber-like elasticity where other resins crack. Tested to –30°C in rubber compounds.
Broad Solvent Compatibility
Soluble in ethanol, chloroform, acetone, DMAC. Formulated with 25–40% ethanol blends for optimal viscosity.
Strong Adhesion Substrate Range
Bonds to leather, wood, paper, metal, and synthetic resins. Used in packaging inks for aluminum foil and glassine.
Factory-Direct from China
In-house vinyl ether polymerization. Capacity expanded August 2026. Stock lead time 3–7 business days.
Applications
📋 Challenge: PSA Tapes Losing Adhesion At High Temperature
A customer needed a resin that maintains high peel strength at 60°C for tape applications.
✅ Solution: PVE A50 (Tg –60°C)
Provides rubber-like elasticity and cohesive strength at elevated temperatures. Recommended with tackifying resins.
🎨 Challenge: Poor Leveling And Flexibility In Coatings
A customer needed to improve leveling and dry-film flexibility of nitrocellulose lacquers.
✅ Solution: PVE A25 (MW 3k–5k)
Added as a plasticizer, it significantly improves leveling and flexibility while maintaining gloss.
⚙️ Challenge: Rubber Becoming Brittle At Low Temperature
A customer required a rubber formulation that remains elastic at –30°C.
✅ Solution: PVE A50 (Tg –60°C)
Exceptional low-temperature performance, significantly improving cold resistance and impact resistance of rubber compounds.
🧵 Challenge: Artificial Leather Surface Too Hard, Poor Hand Feel
A customer needed to make artificial leather softer and more durable.
✅ Solution: PVE A25 or A50
Improves flexibility and abrasion resistance of synthetic leather, while enhancing surface touch.
Product Specifications
A25 Grade
K Value 10–17 · MW 3,000–5,000
Ideal for coatings, plasticizers, surface modification
A50 Grade
K Value 55–65 · MW ~70,000
Recommended for adhesives, rubber, high-strength applications
| Parameter | A25 Grade | A50 Grade |
|---|---|---|
| Product Name | Poly(vinyl ethyl ether) A25 (PVE / PVEE) | Poly(vinyl ethyl ether) A50 (PVE / PVEE) |
| Synonym | Poly(ethyl vinyl ether); PVEE; Lutonal A25/A50 Performance Equivalent | |
| CAS Number | 25104-37-4 | |
| Appearance | Colorless to bright yellow transparent viscous liquid | |
| Density (g/cm³) | 0.91 – 1.00 | |
| pH (5% in water) | 3.5 – 6.0 | |
| K Value | 10 – 17 | 55 – 65 |
| Molecular Weight | 3,000 – 5,000 | ~70,000 |
| Loss on Drying | ≤ 8.0% | |
| Glass Transition (Tg) | ~ –60°C | |
| Packaging | 20 kg / 170 kg drums | |
| Documents | COA, SDS available | |
PVE vs Lutonal® A25/A50 Comparison
Alfa Chemical's PVE is a performance equivalent to BASF's Lutonal A25/A50, offering comparable performance with competitive pricing. Our quality system is consistent with our PEI (CAS 9002-98-6) and SMA (CAS 9011-13-6) product lines.
| Feature | Alfa PVE | BASF Lutonal® |
|---|---|---|
| Grade Equivalents | A25 / A50 | A25 / A50 |
| K Value | A25: 10–17 / A50: 55–65 | A25: 10–17 / A50: 55–65 |
| Appearance | Colorless to yellow viscous liquid | Colorless to yellow viscous liquid |
| Pricing | Competitive | Premium |
| Supply Chain | China manufacturer direct | Global distribution |
| ⭐ Key Advantage | Same performance · Cost-effective · Direct China supply · Full traceability | |
📄 Batch Documentation for PVE / PVEE
Every batch leaves our facility with a COA that reports measured values for the parameters below. No specification ranges, no "typical" placeholders.
Manufacturing & Quality Control
K Value Test
Ubbelohde
MW Distribution
GPC
PVE Batch Retain
24 Months
COA Format
Actual Measured Values
PVE Annual Capacity
2,000 MT (2026)
Third-Party Inspection
SGS · BV on Request
In August 2026, we expanded PVE production capacity to 2,000 MT per year. Stock now ships in 3–7 business days. Full details: Alfa Chemical Expands PVE Resin Production.
Packaging & Shipping
📦
20 kg Drum
Standard small-batch packaging
🛢️
170 kg Drum
Bulk production packaging
🧴
Custom Packaging
Available on request
🚚
Non-Hazardous Shipping
No DG declaration · Express / Air / Sea
Because PVE / PVEE is classified as non-hazardous, shipments clear customs without DG declarations - simpler paperwork and lower freight cost compared to hazardous polymer resins. Every shipment includes COA, SDS, and packing list. Larger orders usually dispatch within 2–3 weeks depending on drum availability.
Why Choose Alfa Chemical
Switching from BASF Lutonal A25/A50 is not about price alone. Formulators who have made the switch tell us the same three concerns: K value must match, the viscosity curve must hold, and the COA must report actual measured values - not a specification range. The five capabilities below are built around those concerns.
📊
K Value and MW Measured Per Batch
Every lot tested by Ubbelohde viscometry for K value and GPC for molecular weight distribution. The COA shows the actual measured values - not "≥" or "typical range."
🎯
Two Grades Cover Both Lutonal Ends
A25 (K 10–17, MW 3k–5k) replaces Lutonal A25 for coatings and plasticizers. A50 (K 55–65, MW ~70k) replaces Lutonal A50 for PSAs and rubber. Both ship from the same facility with the same COA format.
🧪
Side-by-Side Evaluation Support
1–5 kg R&D samples paired with a starting formulation for your application. We recommend the propylene carbonate activator ratio and solvent blend based on your target viscosity.
📋
COA Reports Actual Values, Not Ranges
COA includes measured K value, MW, density, pH, and loss on drying for the specific batch. Retain samples held 24 months for traceability. Third-party inspection (SGS, BV) on request.
🏭 2,000 MT Capacity, 3–7 Day Stock Dispatch
In-house vinyl ether polymerization at our Zhengzhou facility. Capacity expanded in August 2026. Stock items ship within 3–7 business days; custom packaging available from 20 kg to 170 kg drums.
Frequently Asked Questions
What is the difference between A25 and A50 grades?
A25 has a lower molecular weight (K Value 10–17, MW 3,000–5,000) and is typically used in coatings and plasticizers. A50 has a higher molecular weight (K Value 55–65, MW ~70,000) and is preferred for adhesives, rubber, and high-strength applications.
Is this product a performance equivalent to Lutonal®?
Yes, Alfa Chemical's PVE / PVEE is a performance equivalent to BASF's Lutonal® A25 and A50 grades, offering comparable performance with competitive pricing.
What are the typical applications of PVE / PVEE?
PVE / PVEE is used in pressure-sensitive adhesives, coatings, rubber, plastics, artificial leather, textile finishes, and lubricant additives.
How should PVE / PVEE be stored?
Store in a cool, dry place in sealed containers. Avoid moisture and direct sunlight. Shelf life is 24 months under proper storage conditions.
What parameters does the COA report for PVE / PVEE?
Every batch COA reports actual measured values for K value (Ubbelohde), molecular weight distribution (GPC), density, pH (5% in water), and loss on drying. Not a specification range - the real numbers for that specific lot.
What is the MOQ for PVE / PVEE?
Standard MOQ is 20 kg (one drum). R&D samples (1–5 kg) are available. Contact us to arrange →
Related Resources
Related Articles
Applications of Poly(vinyl ethers) - Lutonal Replacement NotesSolvent selection, gelation behavior, and compatibility data.
Alfa Chemical Expands PVE Resin ProductionCapacity expansion completed August 2026.
Related Product Lines
PEI (CAS 9002-98-6)Polyetherimide - high-temperature engineering polymer.
SMA (CAS 9011-13-6)
Styrene maleic anhydride copolymer.
About Alfa Chemical
Alfa Chemical manufactures specialty chemicals in Zhengzhou, Henan, China. PVE / PVEE is produced entirely at our own facility, so K value and molecular weight distribution are controlled at every step - not sourced from third-party lots.
Switching from Lutonal, or testing PVE for the first time? Send us a note. Samples, batch-specific COA, and a formulation starting point are available on request. Reach us through our Contact Us page, or browse our Other Material Chemicals range.
This page: PVE / PVEE (CAS 25104-37-4)
* Lutonal® and BASF are registered trademarks of BASF SE. Alfa Chemical is an independent manufacturer and supplier of performance equivalent products. We are not affiliated with, endorsed by, or sponsored by BASF SE. This information is for industrial and R&D use only. Users are responsible for verifying compliance with local regulations.
Hot Tags: CAS 25104-37-4 | Poly(vinyl ethyl ether) PVE / PVEE | China Manufacturer, price, quotation, discount, in stock, for sale, Material Science
No Information










